The side of a bevel has to be near the line of a marking, and exact interface of details can achieve adjustment, deleting material gradually (a photo of L).
Then paste laths without bevels to forward and back socle boards. Make a bevel only on the top part of forward and back socle boards so that they densely connected to lateral socle boards.
Use couple of thick whetstones with an equal side more densely to press central parts of CC to a back wall.
Then paste regiments of O/Q to partitions of P/R and in addition fix screws.
Now cut back crossbeams of Z, AA, VV rack, central parts CC and lateral crossbeams of DD, IT. Paste the lower back crossbeam of AA and central parts to a back wall of V (a photo To). After that paste into place a back top crossbeam and racks, then lateral lower crossbeams with central parts to sidewalls and, at last, the top lateral crossbeams and racks.
At first paste into place sidewalls, having fixed in addition screws, then add a back wall, applying to its fastening only glue.
Note. Before starting production, measure and write down the amount of deepening on the lower party of a cover.
2. To give to an emphasis the demanded form, make copies of a template, having increased them twice. Then paste to a spring emphasis.
Check how a collected emphasis is inserted into openings, and adjust them if it is required. They have to be taken out and utaplivatsya without big effort and thus remain at the necessary height.
2. Make tongues 6 wide and 12 mm in depth on the center of internal edges of all racks and crossbeams. Then create thorns 6 thick and 12 mm long on the ends of crossbeams.
2. Having cut socle boards of S and a tsarga of T, paste them to assembly of shelves with O-R partitions.
The top of the basis case has to be inserted into this deepening densely.
Before connecting socle boards, it is necessary to saw round bevels on the laths pasted from above. After that it is possible to start milling of roundings off.
If it does not manage to be inserted, it will be required to adjust its sizes to deepening or to broaden edges of deepening for final assembly.